Operating parameters:
Working voltage: AC100V~240V (50/60Hz)
Rated power: 200W
Maximum ambient temperature: 40 ° C
Light source parameters:
Light source: 18x10W (four in one) RGBW
The angle of light emission is 10-65 °
control parameters
Strobe: 0-20Hz
Dimmer: Linear 0-100% standard dimmer
Controller: DMX512, RDM
Channel: Channel 11/7
Built in programming: 3 strobe+8 static color mixing+4 automatic+zoom
Control mode: DMX512, manual, master-slave, voice control
Noise: Intelligent temperature, active heat dissipation,
Silent below 40 degrees, the fan starts working when the temperature exceeds 40 degrees.
The maximum noise level from 1 meter away is 43.0 dBA (close to ambient noise). You can choose to turn off the fan and use silent mode, but when the temperature exceeds 80 degrees, the power will decrease according to the temperature to ensure the safety of the LED lights.
Overtemperature protection: Half power protection when the temperature exceeds 80 degrees Celsius
Real time monitoring: light source temperature, signal display.
Lamp parameters:
Shell: Full set of aluminum alloy (high temperature resistant), fine sand paint (high-end wear-resistant)
Display: Touch screen+4 buttons, supports 30 seconds instant power off and light up
Power interface: One inch (blue) output (white) power controller
Signal interface: 3-pin (optional 5-pin), one in one out
Waterproof rating: IP20
Waterproof rating: IP20
Net weight: 3.3 kilograms
Lamp size: 282 * 228 * 253MM